Swimming pool heat pump unit is mainly used to make pool hot water energy-saving equipment. At present, it is mainly used in hotels, hair salons, bath centers and large amusement parks. Do you know what its working principle is? What are its advantages? Now we'll give you a detailed introduction.
Working principle of swimming pool heat pump
Swimming pool heat pump is a kind of equipment which uses the principle of reverse Carnot cycle to recover and release the heat from indoor pool water evaporation to the swimming pool water or indoor air, so as to keep the swimming pool and indoor constant temperature, and achieve the dehumidification effect.
In other words, a small amount of electric energy is used to drive the compressor to run. After passing through the expansion valve, the high-pressure liquid working medium evaporates into a gaseous state in the evaporator, and absorbs a large amount of heat in the ambient air. The gaseous working medium is compressed into a high-temperature and high-pressure liquid by the compressor, and then enters the condenser. The condenser releases heat to heat the swimming pool water, thus continuously heating the swimming pool water.
In the design of constant temperature dehumidification and air conditioning system of swimming pool, we use the heat pump energy recovery system to fully absorb the heat in the indoor hot and humid air for the heating of swimming pool water. This can not only save a lot of energy, but also make the indoor air achieve the purpose of dehumidification.
Advantages and characteristics of swimming pool heat pump
1: In the dehumidification (refrigeration) operation, the total heat recovery technology is used to recover all the heat discharged into the environment to heat the swimming pool water, so as to achieve the purpose of energy saving and consumption reduction.
2: Stable and reliable, new system design, customer service of the traditional heat recovery system circuit long, difficult to return oil, with the international well-known brand compressor and patent technology high-efficiency casing, refrigeration and heating are more powerful.
3: Energy saving and environmental protection: compared with other conventional hot water equipment (such as oil fired boiler, gas fired boiler, electric boiler, etc.), the heat pump technology can save 65% - 80% of the operation cost, and has no pollution to the environment.
4: Use safety: water and electricity isolation; no open fire, no leakage, to ensure personal safety.
5: Intelligent control: it can realize automatic temperature control, intelligent defrosting and automatic switching of various modes.
The above is our detailed introduction to the working principle of swimming pool heat pump unit, as well as its advantages and characteristics. Through reading this article, do you have a new understanding of this equipment? If you have installation requirements, you can contact us at any time. We will design the best pool heat pump solution according to the situation you provide.